CleanCut Step, Convertible, and Ultra-Low: How They Differ

The CleanCut Step creates an open step-through entry for shower use. The Convertible adds a removable center plug so the tub can also hold water for a bath. The Ultra-Low creates an open entry for taller tubs and has a specific minimum tub-height requirement. Choose between them by how the household uses the tub and which product fits it, not by the name alone.[1][2][3]

EazyStep Bath provides CleanCut Step installation at customer properties by appointment in Lexington, Jackson, and nearby West Tennessee. Check the service area before requesting a tub evaluation. This comparison explains manufacturer options; it does not promise local availability of every model.

Start with whether anyone still wants a bath

If the tub is used only for showers, an open entry may fit the intended use. If someone still wants to fill the tub, keep that requirement in the discussion from the start. The Convertible is the model in this comparison that includes a removable water-tight plug for switching between shower and bath use.[2]

Do not confuse that removable plug with an unmodified bathtub. CleanCut describes its conversion process as cutting out part of the existing tub and fitting a product into the opening.[4] Removing the plug changes how the Convertible is used; it does not restore the original tub wall.

For a wider look at replacement showers and other approaches, use the bathtub access options guide. If the conversion itself is unfamiliar, start with what a CleanCut bathtub conversion changes. Here, the decision is between the named products.

CleanCut Step: an open entry with several rail-fit sizes

The manufacturer lists a 24-inch-long opening for the Step and three product widths based on the thickness of the tub rail.[1] Those are different dimensions. The opening describes the space to step through. The size selected for the rail describes how the product fits over the tub wall.

That distinction matters when reading a listing marked narrow, medium, or wide. Do not select a size simply because the bathroom feels small or because a wider entry sounds preferable. Match the actual tub measurements to the current sizing instructions for the exact product.[5]

The Step is worth discussing when the intended result is shower use through an open tub entry. Before settling on it, ask whether anyone needs to retain full-bath use and what the finished threshold would be in this particular tub.

CleanCut Convertible: a removable plug and a different opening

CleanCut lists an 18.75-inch-long step-through opening for the Convertible, compared with the 24-inch opening listed for the Step. Its product page lists one rail-fit width, described as wide, and a removable center insert.[1][2] Retaining bath use therefore involves more than adding a plug to an otherwise identical opening.

Ask to review how the plug is handled and secured before choosing this model. Consider who will remove it, where it will be stored during shower use, and who will reinstall it for a bath. These are household planning questions, not claims that every person can operate the insert comfortably.

An existing Step does not become a Convertible merely by adding the center piece. The manufacturer says changing from a Step to a Convertible requires removing the entire Step and replacing it with the Convertible unit.[4] Discuss bath retention before the initial installation rather than assuming a later change will be a small accessory purchase.

CleanCut Ultra-Low: check both tub heights

The Ultra-Low is intended for high-profile tubs. CleanCut requires the tub to be at least 14.75 inches tall on both the inside and the outside for this product to fit.[3] An outside measurement alone does not answer that requirement.

The product name does not establish the finished step height. CleanCut explains that the remaining threshold depends on the original tub height. Its FAQ uses the original height minus an 8.5-inch template height for the Step and Convertible, or minus 14 inches for the Ultra-Low, as an approximate guide. The manufacturer notes that product overlap makes this an estimate rather than an exact finished dimension.[4]

Ask for the expected finished threshold in your tub, not a threshold borrowed from another installation. A larger cutout specification does not prove that a product fits a shorter tub. Keep the minimum height, rail dimensions, and finished entry questions separate.

Compare the fit before choosing the product

Use the current manufacturer sizing resources rather than estimating from a product photograph. The sizing page distinguishes the shortest depth measurement, widest top rail measurement, and widest bottom rail measurement.[5] If a measurement is uncertain or difficult to reach, identify it as unknown and leave it for the site review.

Prepare a short list for the appointment:

• Does anyone need to keep filling the tub for a bath?
• What is known about the tub model, dimensions, and previous modifications?
• Which exact product and size are being considered?
• What opening and finished threshold would that choice leave?
• Does the proposed work address the difficulty you want to change?

Material compatibility is another question. Our guide to bathtub materials and CleanCut compatibility covers that review separately. Do not treat a material name or a product comparison as approval to cut the tub.

You do not need to demonstrate a difficult step or transfer to explain the concern. Describe what is hard and what you want to retain. If keeping the existing tub is no longer the goal, discuss tub-to-shower replacement as a different project rather than assuming a cutout will provide the same result.

The FAQ answers above summarize the manufacturer product pages and technical FAQ.[1][2][4] The Ultra-Low height requirement is also stated on its product page.[3]